Please Wait...

General Application Doors

General Application Doors

*Doors are the entry and exit points for any property and IHMS brings a set of FLUSH DOORS, Doors with View Glass and Doors with louvers.

*IHMS provides a door that can hold up to the rigors of your business, expected efficiency of your commercial place and support for your household. Our doors for general application provides a long-lasting and reliable performance. That’s why many requirements are turning towards IHMS for general application doors.

Door Skin Material Galvanized steel as per IS 277 / Stainless steel 304 grade, No.4 finish.
Door Skin Thickness 0.8mm / 1.2 mm / 1.6 mm.
Frame Material Galvanized material as per IS 277 / Stainless steel 304 grade, No.4 finish.
Frame Sheet Thickness 1.2mm / 1.6mm / 2.0 mm.
View Glass The vision glasses on doors shall be double glazed flush to the surface of the door shutter. Size shall be minimum 150mm to 750mm in width, minimum 150 mm to 1600 mm in height. However, the standard sizes are 150 x 750mm, 200 x 300mm, 300 x 300mm, 350 x 750mm, 450 x 750mm.
Finish Pure polyester powder coated to any RAL shade / wood stained to withstand 300 hours of salt spray.
Infill Materials Honeycomb / Polyurethane foam / Mineral wool / Steel stiffened.
Door Thickness Minimum 47 mm.
Packing The frame and shutters shall be wrapped with protective film and put into corrugated boxes. The boxes shall be crated or palletized depending on the quantity and mode of transport.
Frame Profile (Standard) Single rebated frame shall be 100 x 58 mm and double rebated profile 150 mm x 58 mm. The frames are manufactured with mitre joints as a standard and in knock down condition.
Non Standard Frame Profiles Non standard frame profiles can be manufactured on demand. The depth shall vary from 100mm to 450 mm for single and double rebated frames.