Cleanroom
Application Door

info@icleanhollowmetal.com

+91 8662971114

Description

- Specific production areas need to be protected from contamination happens due to air and other sources. IHMS offers doors for cleanroom applications.
- IHMS doors for cleanroom applications matches all the requirements like isolation, high air-tightness, controlling inside pressure, fast opening & closing, low air loss, stainless steel for high hygiene etc.
- With the best technical support from the parent company IClean Technologies, IHMS brings DOORS FOR CLEANROOM APPLICATION.

SPECIFICATION

Door Skin Material

Galvanized Steel As Per IS 277 / Stainless Steel 304 Grade, No.4 Finish.

Door Skin Thickness

0.8mm/1.2 mm/1.6 mm

Frame Material

Galvanized Material as per IS 277/ Stainless Steel 304 Grade, No.4 Finish.

Frame Sheet Thickness

1.2mm/ 1.6mm/ 2.0 mm

View Glass

The vision glasses on doors shall be double glazed flush to the surface of the door shutter. Size shall be minimum 150 mm to 750 mm in width, minimum 150 mm to 1600 mm in height. However the standard sizes are 150 x 750 mm, 200 x 300 mm, 300 x 300 mm, 350 x 750 mm, 450 x 750 mm.

Finish

Pure Polyester Powder Coated to any RAL shade / wood stained to withstand 300 hours of salt spray.

Infill Materials

Honeycomb/ Polyurethane Foam /Mineral Wool / Steel Stiftened

Door Thickness

Minimum 47 mm

Packing

The Frame and Shutters shall be wrapped with protective tilm and put into corrugated boxes. The boxes shall be crated or palletized depending on the quantity and mode to transport.

Frame Profile (Standard)

Single Rebated frame shall be 100 x 58 mm and double rebated profile 150 mm x 58 mm. The frames are manufactured with miter joints as a standard and in knock down condition.

Non Standard Frame Profiles

Non Standard Frame Protiles can be manutactured on demand. The depth shall vary from 80 mm to 450 mm for single and double rebated frames.

info@icleanhollowmetal.com

+91 8662971114

CleanroomApplication Door

info@icleanhollowmetal.com

+91 8662971114

Description

SPECIFICATION

Door Skin Material

Galvanized Steel As Per IS 277 / Stainless Steel 304 Grade, No.4 Finish.

Door Skin Thickness

0.8mm/1.2 mm/1.6 mm

Frame Material

Galvanized Material as per IS 277/ Stainless Steel 304 Grade, No.4 Finish.

Frame Sheet Thickness

1.2mm/ 1.6mm/ 2.0 mm

View Glass

The vision glasses on doors shall be double glazed flush to the surface of the door shutter. Size shall be minimum 150 mm to 750 mm in width, minimum 150 mm to 1600 mm in height. However the standard sizes are 150 x 750 mm, 200 x 300 mm, 300 x 300 mm, 350 x 750 mm, 450 x 750 mm.

Finish

Pure Polyester Powder Coated to any RAL shade / wood stained to withstand 300 hours of salt spray.

Infill Materials

Honeycomb/ Polyurethane Foam /Mineral Wool / Steel Stiftened

Door Thickness

Minimum 47 mm

Packing

The Frame and Shutters shall be wrapped with protective tilm and put into corrugated boxes. The boxes shall be crated or palletized depending on the quantity and mode to transport.

Frame Profile (Standard)

Single Rebated frame shall be 100 x 58 mm and double rebated profile 150 mm x 58 mm. The frames are manufactured with miter joints as a standard and in knock down condition.

Non Standard Frame Profiles

Non Standard Frame Protiles can be manutactured on demand. The depth shall vary from 80 mm to 450 mm for single and double rebated frames.

Cleanroom
Application Door