French Door

info@icleanhollowmetal.com

+91 8662971114

Description

- There are areas where we need to have a door for the partition and limited / partial visibility like between living room and dining room OR between living room and balcony.
- Adding glass to a HOLLOW METAL DOOR with micro finish and details, this is what IHMS can produce.

SPECIFICATION

Door Skin Material

Galvanized steel as per IS 277.

Door Skin Thickness

0.6mm / 0.8mm.

Frame Material

Galvanized material as per IS 277.

Frame Sheet Thickness

1.2mm

View Glass

Single glazed with glass trim / bead. Size shall be minimum 150mm to 750mm in width, minimum 150mm to 1600mm in height. However, the standard sizes are 150 x 750mm, 200 x 300mm, 300 x 300mm, 350 x 750mm, 450 x 750mm.

Finish

Pure polyester powder coated to any RAL shade / wood stained to withstand 300 hours of salt spray.Also available in PVC laminate.

Infill Materials

Honeycomb / Polyurethane foam.

Door Thickness

Minimum 47 mm.

Packing

The frame and shutters shall be wrapped with protective film and put into corrugated boxes. The boxes shall be crated or palletized depending on the quantity and mode of transport.

Frame Profile (Standard)

Single rebated frame shall be 80 x 58 mm. The frames are manufactured with mitre joints as a standard and in knock down condition.

Non Standard Frame Profiles

Non standard frame profiles can be manufactured on demand. The depth shall vary from 80mm to 150 mm for single and double rebated frames.

info@icleanhollowmetal.com

Contact